Mediatek SmartDevice Android APK v1.7.6

Mediatek SmartDevice Android APK v1.7.6


This app is specially made for mediatek based wearable smartwatches. It has many features that you can control wirelessly. in eBay there are many Chinese smartwatches available at a very cheap prices. so get one for you and enjoy more customization from this android app.

Note : Right Now it only supports MT2502 /MT2503 Chip Smart Devices


Features in this app :

1. Strongly Needed MTK Smartwatch
2. It Connects through SPP or GATT (BLE) Mode
3. After Connecting you can install or uninstall Linkitt App
4. You can set Push Notification ON or Off
5. Can Show Phone Messages on Watch
6. Integrated with Google Fit
7. Sync Time, Messages, Notifications etc..

Download Mediatek SmartDevice APK v1.7.6 From Below :


[MT8735] Lenovo Phab 2 Official Stock Rom


[MT8735] Lenovo Phab 2 Official Stock Rom


Lenovo has recently launched Phab 2 Device with a Premium Specifications, Features and Big Display. It is powered by Mediatek MT8735 Quad Core Processor and packs with 3GB of RAM.

If you are searching for a stock rom, then you came at the right place to download.

Please Note : Install at your own risk

Phone Information :

Display : 6.4inch HD IPS
Camera : 13MP Back and 5MP Front
Internal : 32GB
RAM : 3GB
Sim Slot : Hybrid (VoLTE Supported)
Android : 6.0 Marshmallow
Chipset : Mediatek 

Download Lenovo Phab 2 Stock Firmware/ ROM :

[MT6753] YU Yureka Note Official Stock Rom

[MT6753] YU Yureka Note Official Stock Rom 

YU Yureka Note YU6000 - Stock Rom

Hello Micromax YU Yureka Note Users, Here we are back with an Official Stock Rom for your Device with Installation Guide. so i request you to please follow below steps carefully before proceed.

Note : we are not responsible for any Damages happen to your Phone while Installing/ Updating Rom

How to Flash/ Install :

Download Rom from Below Link
Save it to your Desktop Folder
Extract it and Install Drivers
Now Open SP Flash tools from that
Load Android Scatter File Txt From Firmware Folder
Now Click Download/ Upgrade and connect your Device
Wait for it finish and Reboot

Download Yu Yureka Official Stock Firmware/ Rom :


[MT6580][SM-G9500] HDC Galaxy S8 Official Firmware

[MT6580][SM-G9500] HDC Galaxy S8 Official Firmware

HDC Galaxy S8 ROM For all MT6580 Devices 

Recently Samsung has Officially launched two new smartphones S8 and S8 Plus, But here HDC Company also launched the Fake Galaxy S8 with Mediatek MTK 6580 Quad Core Processor. so in this article we are back with an official Firmware/ Rom for S8 Clone.

Note : we are not responsible for any kind of damages happen to your device while installing/ Updating this Firmware

HDC Galaxy S8 Clone Information :

Model No : SM-G9500
Android : 6.0
Version : S305_V0.0.1_2017_0329_1925 – full_hexing6580_we_m-user 7.0 MRA58K
Chipset : MT6580
Language : Multi

How to Install :

Download SP Flashtools From Here
Unzip after downloaded

Open Flashtool From that and select Scatter-Loading and search MT6580_Android_Scatter.txt (Find this on your Firmware)

Wait for Few Sec..it will load

After that select Download Only or Firmware Upgrade

Now Turn off your Device and Remove the Battery

Click on Download Button to Start (Then Connect your Phone to PC without Battery)

It will start flashing, wait for it finishes and Enjoy

Download HDC Galaxy S8 Official Firmware/ ROM for MT6580 :

[MT6753][K430xx] TWRP v3.0 Recovery For LG K10

[MT6753][K430xx] TWRP v3.0 Recovery For LG K10

TWRP Recovery v3.0 For LG K10


Hello LG K10 Users, Today we are back with a TWRP Recovery for LG K10 (Mediatek). so don't try to install this on Qualcomm LG K10. if you do then your device will be dead or bootloop.

Note : we are not responsible for any kind of damages happen to your phone while updating recovery/ flashing.

Features of TWRP 3.0.0.0 Recovery :

New latest Theme
Terminal Emulator Included
SuperSU Installer
Storage Support
Flashing of image Files
Updated exfat, exfat fuse, dosfstools
etc...

Download TWRP 3.0.0.0 Recovery for LG K10 (K430xx) :


[MTK] Increase Speaker Volume in All Mediatek Phones


[MTK] Increase Speaker Volume in All Mediatek Phones


Hey People, welcome to Mediatek Guides in this Article we are back with a new tutorial on how to increase Speaker Volume in all MTK Devices.

Note : Please make sure your device has been rooted for this and we are not responsible for any kind of damages happen to your phone by doing this steps.

Follow Below Steps to Increase Your Phone Speaker Volume :

First of all Root your Device and Download Mobileuncle MTK TOOL APK From Here

After Downloaded Install It and Open From your App Drawer

Select Engineer Mode (MTK)



Click On it and Swipe on Next Page that is Hardware Testing



Click On AUDIO and Select Loudspeaker Mode 


In Settings you will find MAX Volume Value 128, then change it to 140 or 145 ( 150 is Danger its too Loud your speaker may Damage if your do)



and Press SET Button on right Side that's All.

If your LIKE this Post, So Please Share it with your Friends and Family Who uses Mediatek Device and want's to Increase their Speaker Volume.

[MTK6735] iPhone 7 Plus Clone Official Firmware

[MTK6735] iPhone 7 Plus Clone Official Firmware

Goophone iPhone 7 Plus Official ROM


This is the Latest Firmware taken from Goophone iPhone 7 Plus supported for Mediatek MTK6735 Quad Core Chipset which is clocked at 1.3Ghz.

Note : This ROM can be installed Only on Matched Chipset Mobiles. but it will give some bugs like force closes, camera not works etc.. so you have to port some files from your stock rom to this firmware to make it bugs free.

Features of this iPhone 7 Plus :


This Phone comes with a 720p (1080P Fake) HD Display with Multi Touch Support

Sports with a REAL 64Bit MTK6735 Quad Core Processor

2GB RAM and 16GB Internal But System Shows Fake 128GB/ 256GB...

Single Sim with 2G, 3G and 4G Compatibility

8MP Back Camera (Shows Fake 13MP)

Android 6.0 Marshmallow (iOS 10 Skinned)


Download Goophone iPhone 7 Plus Official Firmware/ ROM :